Table of Contents
Advertisement
4 Recording Images
4.3
Snapshot Recording
A picture of the image being monitored can be saved to an SD memory card.
1.
Insert an SD memory card into the BL-WV10 (see page 55).
2.
Display the Monitoring Screen and press SNAPSHOT.
•
Upon pressing SNAPSHOT, the image being monitored will be saved as
a picture to the SD memory card.
•
A list of recorded pictures can be viewed on the [Pictures] screen (see
page 76).
Note
•
Snapshot recording is not available when the Multi-Camera Screen is visible
(see page 47).
4.4
Timer Recording
Note
•
If the BL-WV10's date and time setting (page 80) is set to use Daylight Saving
Time (i.e., if [DST] is turned on), actual recording time will be based on Daylight
Saving Time.
•
If the SD memory card is removed while setting up for timer recording, the
setup screen will change to the Monitoring Screen, with all timer settings
cancelled.
4.4.1
Setup for Timer Recording
1.
Insert an SD memory card into the BL-WV10.
•
An SD memory card is not needed if you are not recording to one (see
page 63).
2.
Press MENU.
•
The menu is displayed.
60
CAM1
Recording
Status indicator: Red
Shown in upper-right corner
of screen while snapshot is
being taken
Advertisement
Table of Contents
