Table of Contents
Advertisement
Registering the Preset Keys
The camera's display positions can be registered to correspond to numbers of the
remote control's number keys.
1.
Using the navigator keys, pan and tilt the lens and aim it at the position you
would like to register to a preset key.
2.
Hold the desired preset key number key (1 to 8) for about 5 seconds.
•
A confirmation screen will appear.
•
The currently set name for the preset will appear.
•
Select [Yes] to confirm the displayed preset name.
3.
To set the preset name manually, select [Yes] and press ENTER.
•
The character input screen is displayed. Enter the preset name. (See
page 114 for text entry methods.)
4.
Confirm the preset name, select [Yes] and press ENTER.
Note
•
A preset name can use up to 15 alphanumeric characters. The following
characters cannot be used:
" ' & < >
•
Use of the preset keys stores data to the camera. When multiple users are
using the cameras, only the data for the last registration will remain valid;
other users can overwrite registered presets.
•
Registering a preset key will also register the brightness and white
balance settings (see page 117) at the time of the registration.
•
If the camera features an optical zoom, the current zoom position and
focus setting will also be registered.
3 Viewing Camera Images
43
Advertisement
Table of Contents
