Table of Contents
Advertisement
1 Names and Locations
Programming the remote control
If you have a Panasonic television, the remote control can be used to turn the
television on and off, and to switch the television's video input selection. You must
first set the manufacturer's code for the remote control. While holding down
POWER, enter the 2-digit code found in the chart below. Release POWER after
you have entered the code.
Code
01
02
INPUT SELECT
POWER
Number keys
Note
•
When using the remote control to operate a television, aim the remote control
at the television.
•
If you are not using a Panasonic television, please use the remote control
supplied with the television.
•
If the batteries are removed from the remote control for thirty minutes or longer,
the remote control setting will be reset and you will need to enter the
manufacturer's code again.
18
Manufacturer
Panasonic
Advertisement
Table of Contents
