Table of Contents
Advertisement
6 Setup Menu
Setting
Encryption
Key
MAC Address
Filtering
Note
•
Use the same encryption key number and type for any wireless terminal to be
connected.
•
To register a BL-C30, you will need to specify 2 MAC addresses. Choose the
MAC address indicated on the base of the BL-C30 and one from the following
table based on the last digit in the BL-C30's MAC address.
0 —> 1
2 —> 3
For example, if the MAC address for the BL-C30 is 00:80:F0:54:C0:C4, you should
specify 00:80:F0:54:C0:C4 and 00:80:F0:54:C0:C5.
Certain changes may require the BL-WV10 to restart.
86
Sets an encryption key when encryption is turned on.
Up to 4 encryption keys can be set in advance.
Allowable keys:
Choose from encryption keys 1 through 4 to use with
encryption.
Key types:
The types of encryption keys are 64 bit (10 hexadecimal digits
or 5 letters), 128 bit (26 hexadecimal digits or 13 letters), or 152
bit (32 hexadecimal digits or 16 letters). The level of security
increases with the number of bits, but there may be a slight
decrease in network speed as a result.
Keys 1 through 4:
Enter an encryption key that corresponds in length to the type
selected.
Choose to either enable or disable MAC address filtering.
Turning it on will allow you to specify the MAC addresses of the
devices which are allowed to connect. Up to 16 address can be
specified.
4 —> 5
6 —> 7
Description
8 —> 9
A —> B C —> D E —> F
Advertisement
Table of Contents
