Local Prefix - Oki B4545 MFP User Manual

Setting your terminal
To select the network:
+
Language
This setting enables you to choose a language other than that
imposed by the Country setting.
To select the language:
+

Local prefix

This function is used when your fax is installed with a private
network, behind a company's PABX. It allows you to program an
additional automatic local prefix (to be defined), enabling you to
automatically exit the company's telephone network system, but
only under certain conditions:
• the company's internal numbers, where a prefix is not required,
must be short numbers less than the minimal size (to be defined,
for example France has 10 digits),
• the outside numbers requiring a prefix, must be long numbers
greater or equal to the minimal size (to be defined, for example
France has 10 digits).
Programming your fax with the local prefix consists of two steps:
• defining the minimal size (or equal) of the company's outside
numbers,
• defining the outgoing local prefix of the company's telephone
network. This prefix will automatically be added as soon as an
external number is dialed.
Caution -
numbers stored in the directory, it will be automatically
dialed with each number.
Prefix
Defining the minimal size
+
202 OK - SETUP / GEOGRAPHICAL / NETWORK
Select the required option and press the OK key to confirm.
203 OK - SETUP / GEOGRAPHICAL / LANGUAGE
Select the required option and press the OK key to confirm.
If you define a local prefix, do not add it to the
252 OK - SETUP / NETWORKS / PREFIX
2521 OK - SETUP / NETWORKS / PREFIX / SIZE
NUMBER
You can change the default value for the minimal size of the
company's outside numbers and validate with OK. The minimal
size will range between 1 and 30.
41