Oki B4545 MFP User Manual page 79

Operation
+
+
Your document is stored and will be sent at the new time.
Remark : When sending in "Deferred Send" mode, make sure that the document in
the feeder tray or on the scanner window is located in the right direction.
Transmission with auto redial
This function allows you to monitor the dialing operation during a fax
transmission. In this case, the maximum transmission rate will be
14400 bps.
This function allows for example:
• to hear if the subscriber's fax is engaged and if so, choose the moment
when the line is clear to start the document transmission.
• to control the communication progress in case of uncertain numbers, etc.
To take the line manually:
+
+
+
+
As soon as you hear the remote fax tone, the line is clear and you
can start the transmission.
+
If your terminal is set in order to print a transmission report (refer
to paragraph Main settings, page -38), the reduced copy of the
document first page will not be printed and it notifies you that the
communication is manual.
Rerouting
This function is used to reroute faxes received to a directory contact.
To use this function, you
have to perform two operations: set the rerouting address of the fax
and activate rerouting.
Activate rerouting
+
You may enter the number of pages before transmission and
confirm with OK.
Confirm postponed transmission by pressing key
Place the document in the fax feeder.
.
Press
If necessary, set the sound level with navigator
If not already done, enter the subscriber number (or refer to
paragraph Using the last number dialed key, page -76 to
call back the last subscriber).
Press to start the document transmission.
3911 OK - FAX / FAX FORWAD. / REROUTING /
ACTIVATION
Using the keys or within the navigator, select option
.
WITH
79
.
or keys.
>>3911