Oki B4545 MFP User Manual page 91

Operation
+
+
+
+
+
Caution -
settings of the terminal.
+
+
+
+
Remark : 1) When THICK paper type is selected, the print speed is slowed down.
2) Use the manual feeder for paper with a weight greater than 24 lb.
(90 g/m
+
+
Set the required coordinates with the numeric keypad or
. Confirm your setting by pressing key OK.
845 OK - ADVANCED FCT / COPY / CONTRAST
The parameter is used to select the photocopy
CONTRAST
contrast. Adjust the contrast using keys
validate the choice with the OK key.
You can also directly adjust the desired contrast using the
key, press this key several times until the required
adjustment is obtained without using
846 OK - ADVANCED FCT / COPY / LUMINOSITY
The parameter is used to make your original
LUMINOSITY
document lighter or darker. Adjust the brightness required
using keys and
847 OK - ADVANCED FCT / COPY / BINDING
The parameter is used to choose the long or short
BINDING
side according to the type of binding of your document. Make
your choice using keys
the OK key.
All settings made using this menu become default
85 OK - ADVANCED FCT / SCAN. & PRINT
Use keys or of the browser to scroll the setting described
below that you want to modify.
Validate your setting by pressing the OK key.
851 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
Select or
NORMAL
Validate your setting by pressing the OK key.
2)
.
852 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
TRAY
Select the paper tray that you want to use;
or using keys
LOWER UPPER
Validate by pressing the OK key.
853 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
, then validate the choice with the OK key.
and , then validate the choice with
paper using keys
THICK
and
91
and , then
845.
and .
,
AUTOMATIC
.
or