Resolution Selection - Oki B4545 MFP User Manual

Operation
This mode only makes sense on the ADF scanner (a document shall include
several pages) and with a number of copies exceeding 1.
For an assembled copy, the document is faxed in 200 dpi fax mode then
encoded (MMR coding) and stored in the flash memory. Once the document
is entirely scanned, it is printed as many times as requested then erased from
the memory.
The resulting limitations are as follows:
• fax mode scan: 8.5 in. (216 mm ) in width, 1728 pixels,
• zoom forced to 100% (for any user selection).
The assembled copy selection is not available in the following cases:
• flatbed scanner: normal, Banner or Identity Card mode,
• ADF scanner with number of copies = 1,
• number of copies > 1, but with a zoom value different from 100%,
• Mosaic mode activated,
• output to a tray with Letter paper.

Resolution selection

Select HIGH SPEED, QUALITY or PHOTO RESOLUTION using keys
, then validate the choice with the OK key.
Remark : A Resolution key is also available for immediate selection once the slip is entered.
Contrast selection
+
Remark : A Contrast key is also available for immediate selection once the slip is entered.
Adjust the contrast using keys
the OK key.
and , then validate the choice with
96
or