Maintenance
+
Insert chip card (supplied with the toner cartridge) into the card reader
ensuring that the chip is entered as shown in the drawing below.
+
The following is displayed on the scanner control panel screen:
CHANGE TONER ?
YES= OK - NO= C
+
Press OK.
+
Once the chip card has been read, the display shows:
TONER OK
REMOVE CARD
+
Remove the card.
Caution -
If the following is displayed, check that you have inserted the chip card
the right way up:
CANNOT READ CARD
REMOVE CARD
Caution -
If the following is
way up, following the green arrow.
CANNOT READ CARD
CHECK WAY UP
displayed,
get out your card and insert it in the other
130
Green Arrow