Type Of Network; Geographical Settings - Oki B4545 MFP User Manual

Setting your terminal
Your fax number/your name
In the United States, as required by FCC regulations, a heading
Remark :
must be included on all FAX messages.
Your fax will print out your fax number on each document it transmits if you
save this number and if the terminal is set to Sending header (refer to
paragraph Technical parameters, page 47).
To save your fax number and your name:
+
+

Type of network

You may connect your fax to either a PSTN or private network such as private
automatic branch exchange (PABX). Select the network that applies.
To select the type of network:
+

Geographical settings

These settings will enable you to use your terminal in different preset
countries using different languages.
Country
By choosing a country, you initialize:
• the settings for the public telephone network,
• the language by default.
To select the country:
+
Network
This setting enables you to individually set the type of public
telephone network so that your terminal can communicate over the
public network of the country you have chosen in compliance with
the applicable standards.
Remark : these settings are different from the
choose between public and private network.
22 OK - SETUP / NUMBER / NAME
Enter your fax number (20 digits max.) and press OK to confirm.
Enter your name (20 characters max) then press OK to confirm.
2511 OK - SETUP / NETWORKS / TEL. NETWORK / NETWORK
TYPE
Select option Pabx or Pstn then confirm your choice with OK.
201 OK - SETUP / GEOGRAPHICAL / COUNTRY
Select the required option and press the OK key to confirm.
Network Type
40
(p. 31, which allows you to