Specific Copy Settings - Oki B4545 MFP User Manual

Operation
"Sophisticated" copy
+
+
+
+
+
+
+
+
+
+
+
+
+
When the copy quality is no longer satisfactory, you can perform a
calibration. To do so, refer to paragraph Scanner calibration,
page -138.
Moreover, a high number of controls let you improve the copy
quality.
1.
Position the document (refer to paragraph Document
depositing, page -74).
.
Press key
Enter the required number of copies and confirm with the OK
key.
Using the keys
(Front/Rear) or
DUPLEX->DUPLEX
or
DUPLEX->SIDE SIDE->SIDE
If you have selected for printing the mode
the keys or
LONG BORDER
with the OK key.
Using the keys
, or
FAST QUALITY PHOTO
Using the keys
confirm with the OK key.
Using the keys
confirm with the OK key.
Select the collation mode
and confirm with the OK key.
Using the keys
the key dedicated for zoom set up the degree of zoom between
and confirm with the OK key.
25% TO 400%
Using the keys
required base values and confirm with the OK key.
Using the keys or
or and confirm with the OK key.
THICK
Using the keys
,
AUTOMATIC TRAY
with the OK key.
S
PECIFIC COPY SETTINGS
If you have previously installed the duplex module at the back of your terminal.
or select the scan modes
SIDE->DUPLEX
and confirm with the OK key.
or
SHORT BORDER
or select the resolution:
and confirm with the OK key.
or select the degree of contrast and
or select the degree of brightness and
COPY ASSEMBLED
or or the numeric key pad or eventually
or or the numerical key pad select the
select the type of paper
or select the required paper tray,
or
UPPER TRAY LOWER TRAY
89
1
or
, select with
DUPLEX
and confirm
,
ULTRA FAST
or
NOT ASSEMBLED
NORMAL PAPER
and confirm