Other Problems - Ricoh Caplio 500SE User Manual

Other Problems

Problem
Cannot load the SD
memory card.
The camera does not
operate even when the
buttons are pressed.
The date is incorrect.
The set date disappeared. The battery was removed.
Auto power off does not
work.
The beep sound cannot
be heard.
Cause
The card is facing the wrong way.
Battery is running low.
Camera malfunction.
The correct date/time are not set.
Auto power off is set to [OFF].
The beep sound volume is turned
off.
Solution
Load correctly.
Charge the rechargeable battery
or use the AC adapter. Replace
the alkaline batteries with new
batteries.
Press the power button to turn the
camera off, and then press the
power button to turn the camera
on again.
Remove the battery and load it
again. Reconnect the AC adapter
cable properly, if using.
Set the correct date/time.
If the battery is removed for about
one week, the date setting will be
lost. Make the settings again.
Set the time for auto power off.
Use [VOL. SETTINGS] to set the
volume to a setting other than
mute.
Refer to
P.25
P.24
P.27
P.25
P.29
P.25
P.27
P.119
P.119
P.113
P.115
10
197