Release Button; Shutter Release Button - Ricoh Caplio 500SE User Manual

3
Press the " button to select [CONT. MODE] and press
the $ button.
4
Press the !" buttons to select
[S-CONT], or [M-CONT].
1
5
Press the MENU/OK button, or
# button and press the MENU/
OK button.
• The symbol appears on the screen.
S-CONT (S Multi-Shot)
6
Compose your picture and then press the shutter

release button.

• 16 pictures are taken automatically.
M-CONT (M Multi-Shot)
6
Compose your picture and then press and hold the

shutter release button.

• The camera memorizes the scene while you hold down the shutter
release button.
7
Release your finger from the shutter release button.
• The camera stops shooting and the 16 still images (in the previous 2
seconds) are recorded as one still image.
Note ----------------------------------------------------------------------------------------------
• To return to normal single-image shooting, follow Steps 1 to 3, select [OFF] in Step 4,
and press the MENU/OK button.
• In M-CONT mode, if you release the shutter release button within 2 seconds from the
time you first pressed it, the shots from the time you pressed the shutter until you
released it will be recorded and the number of consecutive shots will be less than 16.
• The flash is turned off.
• During Multi-shot mode, the LCD monitor is turned off.
70