Ricoh Caplio 500SE User Manual page 186

Automatically Establishing a Connection
1
Check that the Bluetooth
2
Turn the camera power on.
• The camera attempts to automatically
connect to the device and the
connection status appears. Pressing
the DISP. button cancels the
operation.
• If a passkey is required to connect to
the destination device, a message
appears prompting you to enter the
passkey. (GP.162)
• If the connection fails, an error
message appears and then the shooting screen appears.
• When a connection is established to a
Bluetooth
antenna icon, GPS information and
GPS antenna icon appear on the
shooting screen.
Note ----------------------------------------------------------------------------------------------
To send still images while connected to a
Bluetooth
serial connection.
Select [PRINT] (GP.157) or [FILE SEND]
(GP.166) on the Playback Setting menu to
display the screen confirming whether to
disconnect the serial connection. Select [YES]
and press the MENU/OK button to disconnect the
serial connection. The list of destination devices
9
appears. Select the destination device and send the still image.
184
®
GPS unit, the Bluetooth
®
GPS unit, you must disconnect the
®
GPS unit is turned on.
®