Ricoh Caplio 500SE User Manual page 160

5
Press the " button to select
[PRINT], and then press the $
button.
• When the Bluetooth
for the first time, a screen appears
confirming whether to search for a
destination device.
• If you have already searched for a
destination device, a list of destination
devices appears. Go to Step 7.
• If the camera is connected using a serial connection, a screen appears
confirming whether to disconnect the serial connection. Select [YES]
and press the MENU/OK button, and go to Step 7.
6
Press the $ button to select
[YES] and then press the
MENU/OK button.
• The camera begins searching for a
destination device and a list of
destination devices appears when the
search is completed.
• By default, up to five devices can be
discovered, but you can change this to
search for any number of devices between one and ten. (GP.176)
7
Press the !" buttons to select
the desired destination device
and then press the MENU/OK
button.
• If the desired destination device is not
listed, press the ADJ. button to search
again for destination devices.
8
• Select a destination device and press
the $ button to display information about the destination device.
• To delete a destination device from the list, select the device and press
the D (Delete) button.
158
®
function is used