Disconnecting The Ac Adapter - Ricoh Caplio 500SE User Manual

Caution-----------------------------------------------------------------------------------------------
• Be sure to attach the AC cable and plug the power cord into the outlet firmly.
• When you are not using the camera, unplug the AC adapter from the camera and the
power outlet.
• While in use, if you detach the AC adapter or unplug the power plug from the outlet,
data may be lost.
• Use the AC adapter with the battery/card cover open.
• When using the AC adapter, the battery level indication may not reach the full area.
• Do not use the AC adapter in a location where it may be exposed to water or lots of
dust.

Disconnecting the AC Adapter

Make sure the camera is turned off before disconnecting the AC
adapter.
1
Unplug the power plug from the outlet.
2
Press and release the latch. The AC adapter coupler
will be ejected. Pull the coupler out of the camera.
3
Close the battery/card cover and turn the knob
toward the L mark.
Caution-----------------------------------------------------------------------------------------------
Before opening or closing the battery/card cover or terminal cover, be sure to remove
any water, sand or mud adhering to the camera, and avoid opening and closing the
cover in places where such contaminants may get inside the camera.
28