Other Problems - Ricoh G800 User Manual

Other Problems

Problem
Cannot load the SD
memory card.
The camera does not
operate even when the
buttons are pressed.
The date is incorrect.
The set date
disappeared.
Auto power off does
not work.
The operation sound
cannot be heard.
Images do not appear
on the TV.
20
192
Cause
The card is facing the wrong way.
Battery is exhausted.
Camera malfunction
The correct date/time are not set.
The battery was removed.
Auto power off is set to [Off].
The operation sound volume is
turned off.
The HDMI cable is not connected.
Solution
Load correctly.
Check that battery is correctly
inserted. Charge battery
(rechargeable battery only) or
insert fresh battery.
Press the POWER button to turn
the camera off, and then press
the POWER button to turn the
camera on again.
Remove the battery and load
it again.
Set the correct date/time.
If the battery is removed for
more than three days, the date
setting will be lost. Make the
settings again.
Set the time for auto power off.
Use [Volume Settings] to set
the volume to a setting other
than mute.
Connect the HDMI cable properly. P.94
Refer to
P.29
P.28,
P.29
P.30
P.29
P.100
P.100
P.98
P.98