Automatically Connecting To A Previously Connected Device (Bt Auto Conn) - Ricoh Caplio 500SE User Manual

Automatically Connecting to a Previously
Connected Device (BT AUTO CONN)
When [BT AUTO CONN] on the Expanded Settings menu is set to
[ON], the next time the camera is turned on, the camera
automatically searches for and connects to the previously
connected Bluetooth
use the same Bluetooth
connected.
Set [BT AUTO CONN] to [ON].
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2
Press the " button to select [BT AUTO CONN] and
press the $ button.
3
Press the !" buttons to select
[ON].
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Note ----------------------------------------------------------------------------------------------
• To automatically connect to a previously connected device after setting this function,
turn off the camera and then turn it on again. The camera automatically connects to
the previously connected Bluetooth
• If [BT AUTO CONN] is set to [ON] but the previously connected device is not
discovered, no connection is established. (GP.154)
• Use this function for a Bluetooth
®
GPS unit. This is convenient if you want to
®
GPS unit to which your camera previously
®
GPS unit.
®
GPS unit only.
9
183