Obtaining Gps Information; Manually Connecting To A Device (Bt Serial) - Ricoh Caplio 500SE User Manual

Obtaining GPS Information

This section explains how to connect the camera to the Bluetooth
GPS unit to receive GPS information using a SPP.
There are two ways to connect the devices.
• Manually connect to a device (GP.181)
• Automatically connect to a previously connected device
(GP.183)

Manually Connecting to a Device (BT SERIAL)

1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2
Press the " button to select
[BT SERIAL] and press the $
button.
• When the Bluetooth
for the first time, a screen appears
confirming whether to search for a
destination device.
• If you have already searched for a
destination device, a list of destination
devices appears. Go to Step 4.
3
Press the #$ buttons to select
[YES] and then press the
MENU/OK button.
• The camera begins searching for a
®
Bluetooth
destination devices appears when the
search is completed.
• By default, up to five devices can be
discovered, but you can change this to
search for any number of devices between one and ten. (GP.176)
®
function is used
GPS unit and a list of
®
9
181