Changing The Text Density (Scene) - Ricoh Caplio 500SE User Manual

Note ----------------------------------------------------------------------------------------------
When using a camera memo, the settings on P.56 cannot be set with the ADJ. button.
(G "Software User Guide")

Changing the Text Density (SCENE)

You can change the shading of text for shooting with [TEXT MODE]
(GP.40) in Scene Mode.
You can select from [DEEP], [NORMAL] and [LIGHT].
To change the setting, use the Shooting Setting menu or the ADJ. button. This section
explains easy ways to change the shading setting with the ADJ. button.
To use the Shooting Setting menu, see "Using the Menu" (GP.60) and "Shooting Setting
Menu Items by Scene Mode" (GP.208).
1
Turn the mode dial to 5.
2
Press the SCENE button.
• The Scene Mode selection screen appears.
3
Press the !" buttons to select
[TEXT MODE] and then press
the MENU/OK button.
4
Press the ADJ. button.
• The text density menu appears.
5
Press the !" buttons to select
the desired density setting.
• You can also press the shutter release
button to shoot the picture.
6
Press the MENU/OK button.
• The text density setting does not appear on the screen.
1
57