Using Quick Review Send - Ricoh Caplio 500SE User Manual

Using Quick Review Send

When [QUICK SEND MODE] is set to [1TOUCH]
1
Check that the destination device is turned on.
2
Turn the mode dial to 5/K and shoot the picture.
• While the image is displayed after shooting, a screen appears
confirming whether to send the image. (GP.116)
3
Press the MENU/OK button.
• Transmission of the image to the
previous destination device begins.
• Once the transmission is completed,
the camera returns to Shooting Mode
and remains connected to the
destination device until the camera is
turned off. The Bluetooth
icon appears on the LCD monitor
while the camera is connected.
Note ----------------------------------------------------------------------------------------------
• You cannot use Quick Review Send to send still images when connecting to a
Bluetooth
to [1TOUCH]. Before you can use Quick Review Send to send still images, you must
8
first use [PRINT] (GP.157) or [FILE SEND] (GP.166) in Playback Mode to send
a still image.
• If the camera is connected using a serial connection, you cannot use Quick Review
Send to send still images to a device even when [Quick Send Mode] is set to
[1TOUCH]. Before you can use Quick Review Send to send still images, you must first
disconnect the serial connection.
• You cannot use Quick Review Send to send still images to a device when [LCD
CONFIRM.] (GP.116) is set to [OFF] even when [QUICK SEND MODE] is set to
[1TOUCH].
• The image size set with [IMAGE FILE SIZE] (GP.178) does not apply.
172
®
®
-enabled device for the first time even when [QUICK SEND MODE] is set
antenna