Selecting The Size Of Images To Be Sent (Image File Size) - Ricoh Caplio 500SE User Manual

Selecting the Size of Images to Be Sent
(IMAGE FILE SIZE)
You can select the size of still images to be sent when using an
OPP profile.
Available Settings
NO ALTER (Do not change the image size)
1280
640 *Default setting
320
160
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2
Press the " button to select [IMAGE FILE SIZE] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Caution------------------------------------------------------------------------------------------
• The image size set with [IMAGE FILE SIZE] is only applied when sending images with
an OPP profile.
8
• When [QUICK SEND MODE] is set to [1TOUCH], the image size set with [IMAGE
FILE SIZE] does not apply.
• When sending images using a BIP profile, the maximum image size that can be
handled by the destination device is automatically obtained. If the size of the image to
be sent is too large, then it is resized before being sent.
178