Ricoh Caplio 500SE User Manual page 176

7
Press the MENU/OK button.
• Transmission of the images to the destination device begins and the
progress is displayed. Pressing the DISP. button cancels the
operation.
• If a passkey is required to connect to the destination device, a
message appears prompting you to enter the passkey. (GP.162)
• If an error message appears during transmission, follow the message
instructions and send the images again.
• Once the transmission is completed,
the camera returns to Shooting Mode
and remains connected to the
destination device until the camera is
turned off. The Bluetooth
icon appears on the LCD monitor
while the camera is connected.
Note ----------------------------------------------------------------------------------------------
• If an image is sent using [PRINT] or [FILE SEND] in Playback Mode before Quick
Review Send, destination devices are not searched for again even if the camera is
turned off and then on again. Transmission of images to the previous destination
device begins. When the transmission is completed, the camera returns to Shooting
Mode and remains connected to the destination device.
• Once Quick Review Send is performed in Shooting Mode and, thereafter, the camera
is connected to a destination device, the camera does not search for destination
devices again. Transmission of images to the previous destination device begins.
When the transmission is completed, the camera returns to Shooting Mode and
remains connected to the destination device.
• The size of the images to be sent can be set beforehand. (GP.178)
8
174
®
antenna