Sending Images In Shooting Mode (Quick Send Mode); Setting Up Quick Review Send (Quick Send Mode) - Ricoh Caplio 500SE User Manual

Sending Images in Shooting Mode
(QUICK SEND MODE)
Immediately after you shoot a still image, you can send that image
to another device. This is convenient if you want to send images to
a predetermined device.
You need to set [QUICK SEND MODE] on the Expanded Settings
menu beforehand.
Setting Up Quick Review Send
(QUICK SEND MODE)
Available Settings
OFF *Default setting
1TOUCH
2TOUCH
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2
Press the " button to select [QUICK SEND MODE] and
press the $ button.
3
Press the !" buttons to select
[1TOUCH] or [2TOUCH].
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Images are not sent in Shooting Mode.
If images have previously been sent, you can automatically send
an image to the same destination device by pressing the MENU/
OK button after shooting while the image is displayed
(GP.116).
You cannot use Quick Review Send to send still images when
connecting to a Bluetooth
using a serial connection.
If images have previously been sent, you can automatically send
an image to the same destination device by pressing the MENU/
OK button after shooting during quick review display (GP.46).
When connecting to a Bluetooth
image is sent after discovering the destination device.
®
-enabled device for the first time or
®
device for the first time, the
8
171