Table of Contents
Advertisement
Playback/Deleting
Symptom
It is not set to 6 (Playback).
Cannot Playback. Or
the Playback screen
The AV cable was not connected properly.
does not come out.
The video format is set wrong.
The contents of SD
A Memory Card is not loaded. Or a Memory Card with
Memory Card cannot
no stored images is loaded.
be replayed, or the
You played back a Memory Card that was not format-
replay screen does
ted by this device.
not appear.
You played back a Memory Card that was not
recorded normally.
The Memory Card's contact surfaces are dirty.
There is something wrong with the Memory Card.
An image
Batteries are running low.
disappeared.
The camera was left unattended and not used, so Auto
Power-Off shut it off.
Files cannot be
The file has been set to protect.
deleted.
The SD Memory Card is "locked".
Cannot format a
The SD Memory Card is "locked".
Memory Card.
Other Problems
Symptom
Cannot load the Mem-
The card is facing the wrong way.
ory Card.
Even when the cam-
Batteries are running low.
era's buttons are
pressed, it does not
operate.
Camera Malfunction.
The date is wrong.
The correct date/time are not set.
The date set has dis-
The batteries were removed.
appeared.
Auto Power-Off does
Auto Power-Off is set to OFF.
not work.
The beep does not
The camera is set to silent.
sound.
Images do not appear
The video format is set wrong.
on the TV.
The cable is not connected.
The TV in/out switch is incorrectly set.
Cause
Cause
219
Measure
Turn the Mode Dial to 6 (Playback Mode).
Reconnect it properly.
Set to correct format.
Load a card with stored images.
Load a card that was formatted and stored on by this
device.
Load a normally recorded card.
Wipe with a soft, dry cloth.
Play another card and if there is nothing wrong with it,
the camera is OK. There may be something wrong
with the card, so do not use it.
If using alkaline batteries, replace with a new set.
If using rechargeable batteries, recharge or use the
AC Adapter.
Turn the power back on.
Release the protection.
Release the "Lock (write-protection)".
Release the "Lock (write-protection)".
Measure
Load correctly.
If using alkaline batteries, replace with a new set.
If using rechargeable batteries, recharge or use the
AC Adapter.
Turn the power off once, turn it back on and switch to
5 (Still Image).
Remove batteries once and load them again.
Reconnect the AC adapter cable properly, if using.
Set the correct date/time.
If the batteries are removed for about two weeks, the
date setting will be lost. Make the settings again.
Set the time for Auto Power-Off.
Set the beep to ON.
Set to correct format.
Reconnect the cable properly.
Check that the TV in/out switch is set correctly.
Appendices
Page
P.91
P.100
P.18
P.121
P.18
-
-
P.12
P.13
P.14
P.16
P.111
P.18
P.18
Page
P.18
P.12
P.13
P.14
P.16
P.10
P.12
P.13
P.14
P.17
P.17
P.123
P.124
P.130
P.100
-
Advertisement
Table of Contents
