Ricoh Caplio 500SE User Manual page 170

7
Press the !" buttons to select
the desired destination device
and then press the MENU/OK
button.
• If the desired destination device is not
listed, press the ADJ. button to search
again for destination devices.
• Select a destination device and press
the $ button to display information about the destination device.
• To delete a destination device from the list, select the device and press
the D (Delete) button.
8
Press the " button and [SEND
ONE] to send one image or
[SEND ALL] to send all images,
and then press the MENU/OK
button.
• Transmission of the images to the
destination device begins and the
progress is displayed. Pressing the
DISP. button cancels the operation.
• If a passkey is required to connect to the destination device, a
message appears prompting you to enter the passkey. (GP.162)
• If an error message appears during transmission, follow the message
instructions and send the images again.
• Once the transmission is completed, a message indicating this
appears.
9
Press the MENU/OK button.
• The display returns to the playback screen.
Note ----------------------------------------------------------------------------------------------
8
The most recently connected destination device appears at the top of the list of
destination devices.
168