Network Features - Panasonic KX-MB2085CX Operating Instructions Manual

9. Programmable Features

9.2.2 Network features

Feature
Setting the LAN features
Setting the IP filtering
Setting the community
name for SNMP
Setting the location
where you use this unit
Setting the service
name for Bonjour
Displaying the link local
address for IPv6
Displaying the IPv6
address for auto
configuration
Setting the IP address
for IPv6
Setting the default
router for IPv6
Setting the information
for scan to FTP
Setting the information
for scan to SMB
Setting the email server
information for scan to
email address, fax to
email address and error
notify
74
Menu
[LAN FEATURE]
[LAN FEATURE]
[SNMP]
[SNMP]/[BONJOUR]
[BONJOUR]
[IPv6]
[IPv6]
[IPv6]
[IPv6]
[FTP FEATURE]
[SMB FEATURE]
[EMAIL FEATURE]
Selection
Enter the LAN feature settings. See page 69 for details.
Enter the IP filtering information.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A
[Network]
3. Type "root" as the user name, then enter the
password (feature #155 on page 57). A [OK]
4. Select the [LAN FEATURE] from the menu.
5. Click [Edit] next to [IP FILTERING].
6. Click [Edit] next to [FILTER (IPv4)]/[FILTER
(IPv6)].
7. Change the mode and edit IP filtering information.
A [Submit]
8. Close the web browser.
Enter the SNMP community name. Consult your service
provider or network administrator for details.
Enter the location information of the unit.
Enter the Bonjour service name.
The link local address will be displayed.
The IP address for auto configuration will be displayed.
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Enter the FTP server information to send scanned
images from the unit to an FTP server. See page 73 for
details.
Enter the SMB folder information to send scanned
images from the unit to an SMB folder. See page 73 for
details.
Enter the email server information to send scanned
image, fax message and error notify from the unit via an
email.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A
[Network]
3. Type "root" as the user name, then enter the
password (feature #155 on page 57). A [OK]
4. Select the [EMAIL FEATURE] from the menu.
5. Click [Edit] next to [EMAIL SERVER].
6. Enter email address (from), email server
information, and time zone.
7. [Submit]
8. Close the web browser.