Fax Features - Panasonic KX-MB2085CX Operating Instructions Manual

9. Programmable Features

9.1.2 Fax features

Feature/Code
Changing the TEL/FAX
delayed ring count
MBNM2NM1NM2N
Erasing all items stored for
the one-touch dial and
phonebook
MBNM2NM8NM9N
Printing a sending report
MBNM4NM0NM1N
Setting the journal report to
print automatically
MBNM4NM0NM2N
Changing the receiving mode
in the manual answer setting
MBNM4NM0NM4N
Changing the default fax
resolution
MBNM4NM0NM5N
60
Selection
If you use an extension telephone in TEL/FAX mode, select the desired number
of times the extension telephone rings before the unit answers the call.
M1N "1"
M2N "2" (default)
M3N "3"
M4N "4"
M5N "5"
M6N "6"
M7N "7"
M8N "8"
M9N "9"
Note:
R See page 47 for details.
M0N "NO" (default)
M1N "YES"
R Disconnect the telephone line cord, USB cable and LAN cable (KX-MB2090
only) before activating this feature.
To erase all items:
1. MMENUN A MBNM2NM8NM9N
2. Press M1N to select "YES". A MSETN
3. Press M1N to select "YES". A MSETN A MMENUN
M0N "OFF": Sending reports will not be printed.
M1N "ON": A sending report will be printed after every fax transmission.
M2N "ERROR" (default): A sending report will be printed only when fax
transmission fails.
M0N "OFF": The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
M1N "ON" (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 39).
M1N "TEL" (default): Telephone mode (page 46)
M2N "TEL/FAX": Telephone/Fax mode (page 47)
To change the default resolution setting for fax.
M1N "STANDARD" (default): For normal-sized characters.
M2N "FINE": For small-sized characters.
M3N "SUPER FINE": For very small-sized characters.
M4N "PHOTO": For photographs, shaded drawings, etc.
Note:
R Using the "FINE", "SUPER FINE" and "PHOTO" settings will increase
transmission time.