Panasonic KX-MB2085CX Operating Instructions Manual page 37

1
Set the original (page 19).
R To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2
Press MPAGE LAYOUTN repeatedly to select "PAGE
LAYOUT".
3
Press MCN or MDN repeatedly to select "N in 1".
A MSETN
4
Press MCN or MDN repeatedly to select the number of
original documents from "2 in 1", "4 in 1" or "8
in 1". A MSETN
5
Press MCN or MDN repeatedly to select the layout from
"PORTRAIT" or "LANDSCAPE". A MSETN
6
If necessary, enter the number of copies (up to 99).
7
When using the scanner glass:
1. MSTARTN
R The unit will scan 1 page.
2. Place the next document on the scanner glass
and press MSETN. Repeat this until all the
documents are scanned.
R The unit will start copying.
R You can press MSTARTN anytime to start
copying.
When using the automatic document feeder:
MSTARTN
8
After you finish copying, press MSTOPN to reset this
feature.
Original document
"2 in 1"
"4 in 1"
Page layout
"PORTRAIT"
"LANDSCAPE"
"PORTRAIT"
"LANDSCAPE"
Original document
"8 in 1"
Note:
R You can save the previous page layout setting
(feature #467 on page 66).
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the "2 in 1" and "4 in 1"
settings.
1. Set the original (page 19).
2. Press MPAGE LAYOUTN repeatedly to select "PAGE
LAYOUT".
3. Press MCN or MDN repeatedly to select "SEPARATE N
in 1". A MSETN
4. Press MCN or MDN repeatedly to select the number of
original documents from "2 in 1" or "4 in 1".
A MSETN
5. Press MCN or MDN repeatedly to select the page layout
of the original document from "PORTRAIT" or
"LANDSCAPE". A MSETN
6. If necessary, enter the number of documents (up to
99). A MSTARTN
7. After you finish copying, press MSTOPN to reset this
feature.
5.2.6 Edge feature
You can set the unit not to copy the outer edges of the
document without reducing the copied documents to fit
the recording paper. This is useful for copying
documents with dirty edges.
Note:
R This feature and page layout features cannot be used
at the same time (except for N in 1).
1
Set the original (page 19).
2
Press MPAGE LAYOUTN repeatedly to select
"EDGE".
3
Press MCN or MDN repeatedly to select "ON". A
MSETN
5. Copier
Page layout
"PORTRAIT"
"LANDSCAPE"
37