Table of Contents
Advertisement
8. Programmable Features
8.9 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
Feature
Setting the LAN
features
Setting the community
name for SNMP
Setting the location
where you use this unit
Displaying the link local
address
Displaying the IP
address for auto
configuration
Setting the IP address
for IPv6
Setting the default
router for IPv6
Setting the FTP server
information
Setting the e-mail server
information
Registering the e-mail
destinations (via an e-
mail server)
Setting the error notify
feature
Setting the information
for the error notify
feature
76
Tab
[LAN Feature]
[SNMP]
[SNMP]
[IPv6]
[IPv6]
[IPv6]
[IPv6]
[FTP Feature]
[E-Mail Feature]
[E-Mail Feature]
[Error Notify]
[Error Notify]
Selection
Enter the LAN feature settings. See page 73 for details.
Enter the SNMP community name. Consult your
service provider or network administrator for details.
Enter the location information of the unit.
The link local address will be displayed.
The IP address for auto configuration will be displayed.
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Enter the FTP server information to carry out the
following functions:
– Printing a file stored on an FTP server (page 33).
– Sending scanned images to a folder on an FTP
server (page 37).
– Saving the fax document in a folder on an FTP
server (page 52).
Enter the e-mail server and SMTP server information to
carry out the following functions:
– Sending scanned images from the unit via an e-mail
(page 36).
– Saving the fax document as an e-mail attachment
(page 52).
Register e-mail destinations (up to 300 destinations) for
the unit. See page 66, 71 for details.
[Enabled]: The unit will send an e-mail to registered
destinations when a problem occurs.
[Disabled] (default): Deactivates this feature.
Enter the e-mail server and SMTP server information to
send error notification e-mails to.
Advertisement
Table of Contents
