Network Features (Lan Connection Only) - Panasonic KX-FLB881 Operating Instructions Manual

9.8 Network features (LAN connection only)

These features can be programmed only by using the web browser.
Feature
Setting the location
where you use this unit
SMTP setting for scan to
e-mail (via e-mail
server)
Setting the error notify
feature
SMTP setting for error
notify feature
Registering
destinations for error
notify feature
Note:
L See the following sections for details on these related features:
– Change password (feature #155 on page 52)
– DHCP mode (feature #500 on page 61)
– IP address (feature #501 on page 61)
– Subnet mask (feature #502 on page 61)
– Default gateway (feature #503 on page 61)
– DNS server #1 (feature #504 on page 61)
– DNS server #2 (feature # 505 on page 61)
– Machine name (feature #507 on page 61)
– Approved users (feature #532 on page 61)
– Auto IP (feature #533 on page 61)
– HTTPD (feature #534 on page 62)
Tab
[LAN FEATURE]
[E-MAIL FEATURE]
[ERROR NOTIFY]
[ERROR NOTIFY]
[ERROR NOTIFY]
9. Programmable Features
Selection
Enter the location information of the unit.
Enter the SMTP server information to send scanned
image from the unit via e-mail server. Consult your
service provider or network administrator for details.
[ENABLED]: The unit will send an e-mail to registered
destinations when the printing problem occurs.
[DISABLED] (default): Deactivates this feature.
Enter the SMTP server information to send an error
notify e-mail.
Enter the e-mail address to which error notify will be
sent, and select the type of problems.
63