Panasonic KX-MB271 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. All in One Printer
  5. KXMB271 - B/W Laser - All-in-One
  6. Operating instructions manual
Panasonic KX-MB271 Operating Instructions Manual

Panasonic KX-MB271 Operating Instructions Manual

Panasonic kx-mb271: user guide
Hide thumbs Also See for KX-MB271:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
This pictured model is KX-MB271.
Do NOT connect the USB cable until prompted by the Multi-Function Station (CD-ROM).
1
Designed to be used only in the U.S.A.
KX-MB781 only:
L This unit is compatible with Caller ID. To use this feature, you must subscribe to the
appropriate service of your service provider.

Operating Instructions

Model No.
2
Multi-Function Printer
KX-MB271
KX-MB781

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-MB271

Summary of Contents for Panasonic KX-MB271

  • Page 1: Operating Instructions

    Multi-Function Printer KX-MB271 Model No. KX-MB781 This pictured model is KX-MB271. Do NOT connect the USB cable until prompted by the Multi-Function Station (CD-ROM). Designed to be used only in the U.S.A. KX-MB781 only: L This unit is compatible with Caller ID. To use this feature, you must subscribe to the...
  • Page 2 L This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © 2007 Panasonic Communications Co., Ltd. All Rights Reserved.

  • Page 3: Important Information

    We dust build-up with a vacuum cleaner (1). cannot be responsible for problems that may be caused by a non-Panasonic toner cartridge or drum unit: – Damage to the unit – Poor print quality –...

  • Page 4: Table Of Contents

    Table of Contents 1. Introduction and Installation 1. Table of Contents Sending a computer document as a fax message from your computer ......40 Accessories Receiving Faxes Included accessories........6 Receiving a fax automatically – Auto answer Accessory information ........6 ON..............40 Finding the Controls Receiving a fax manually –...

  • Page 5: Table Of Contents

    Table of Contents Troubleshooting 11.3 When a function does not work ....66 12.Paper Jams Jams 12.1 Recording paper jam ........74 12.2 Document jams (Auto document feeder)..79 13.Cleaning Cleaning 13.1 Cleaning the white plates and glass.... 80 13.2 Cleaning the document feeder rollers..83 14.General Information Printed Reports 14.1 Reference lists and reports ......

  • Page 6: Introduction And Installation

    *1 Approx. 2,000 sheets of letter size paper can be cartridge printed with KX-FAT92. To ensure that the unit operates properly, we recommend using the Panasonic toner cartridge and drum unit. *2 KX-MB781 only. To place an order online (for customers in the U.S.A. ONLY)

  • Page 7: Button Descriptions

    {FAX AUTO ANSWER} (KX-MB781 only) L To turn the auto answer setting ON/OFF (page 40). {POWER SAVE} (KX-MB271 only) L To set the unit to the power save mode manually. {FAX} (KX-MB781 only) L To switch to the fax mode (page 16, 35).

  • Page 8: Overview

    J LAN interface connector (KX-MB781 only) 8 Paper input tray 9 Recording paper exit j Document exit Removing the shipping tape Remove the shipping tape (1). Note: L Shipping tape positions are subject to change without notice. For assistance, please visit http://www.panasonic.com/help...

  • Page 9: Toner Cartridge And Drum Unit

    L We cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of a non-Panasonic toner cartridge and drum unit. L Do not leave the toner cartridge out of the protection bag for a long time.
  • Page 10 L Do not touch the transfer roller (9). L If the lower glass (j) is dirty, clean it with a soft and dry cloth. L Make sure that the triangles (l) match, to install the drum and toner unit correctly. For assistance, please visit http://www.panasonic.com/help...
  • Page 11 “REPLACE DRUM” appears on the display, replace the toner cartridge and drum unit. L To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge (Model No. KX-FAT92) and drum unit (Model No. KX-FAD93). See page 6 for accessory information.

  • Page 12: Output Tray

    L Do not place the unit in an area where the output tray may be easily bumped into. L The output tray can hold up to approximately 150 sheets of printed paper. Remove the printed paper before the output tray becomes full. For assistance, please visit http://www.panasonic.com/help...

  • Page 13: Recording Paper

    2. Snap the extender (3) into the unit by pushing down the right side of the extender. Before loading a stack of paper, fan the paper to prevent paper jams. For assistance, please visit http://www.panasonic.com/help...
  • Page 14 L Hold the paper input tray with both hands when removing or installing. The paper input tray weighs approximately 2 kg (4.4 lb.) when the recording paper is fully installed. Approx. 2 kg (4.4 lb.) For assistance, please visit http://www.panasonic.com/help...

  • Page 15: Preparation

    2. Preparation 2 Preparation 2For assistance, please visit http://www.panasonic.com/help Connections and Setup Note: 2.1 Connections L If any other device is connected to the same telephone line, this unit may disturb the network Caution: condition of the device (KX-MB781 only).

  • Page 16: Dialing Mode (Kx-Mb781 Only)

    L The default operation mode is the copy mode. L You can change the default operation mode (feature #463 on page 50) and the timer before returning to the default operation mode (feature #464 on page 51) (KX-MB781 only). For assistance, please visit http://www.panasonic.com/help...

  • Page 17: Setting The Original

    Make a copy of the 5 mm 287 mm document using the scanner glass and set the copy. 5 mm ") ") ") L Available document size, document weight and effective scanning area are as follows: For assistance, please visit http://www.panasonic.com/help...

  • Page 18: Help Function (Kx-Mb781 Only)

    " 208 mm(8 " 216 mm(8 " Document weight L Single sheet: 60 g/m to 75 g/m (16 lb. to 20 lb.) L Multiple sheets: 60 g/m to 75 g/m (16 lb. to 20 lb.) For assistance, please visit http://www.panasonic.com/help...

  • Page 19: Adjusting Volume (Kx-Mb781 Only)

    The date and time will be automatically set according to the received caller information. L If the time has not previously been set, Caller ID will not adjust the clock. L You can turn this feature OFF (feature #226 on page 50). For assistance, please visit http://www.panasonic.com/help...

  • Page 20: Your Logo (Kx-Mb781 Only)

    L To erase all characters, press and hold {STOP}. Press {MENU} to exit. To correct a mistake Press {<} or {>} to move the cursor to the incorrect number, and make the correction. L To erase all numbers, press and hold {STOP}. For assistance, please visit http://www.panasonic.com/help...

  • Page 21: Configuring The Unit To Access The Lan (Kx-Mb781 Only)

    =ENABLED [V^] Press {0} to select “DISABLED” i {SET} Set each item. For the IP address: 1. Press {5}{0}{1}. IP ADDRESS PRESS SET 2. {SET} i Enter the IP address of the unit. i {SET} For assistance, please visit http://www.panasonic.com/help...

  • Page 22: Installing Multi-Function Station

    If the unit is connected to a computer with 2.11.1 Required computer environment USB cable before installing Multi-Function Panasonic Multi-Function Station software enables the Station, the [Found New Hardware Wizard] unit to carry out the following functions: dialog box will appear. Click [Cancel] to close it.
  • Page 23 2. [Start] i [All Programs] or [Programs] i L If the name of the desired unit is not displayed on [Panasonic] i the unit’s name i [Uninstall or the list, and the IP address for the unit has been Modify] i [Modify] i [Next]. Then follow the assigned, check [Direct input] and enter the IP on-screen instructions.

  • Page 24: Starting Multi-Function Station

    Note: [Start] i [All Programs] or [Programs] i L You can confirm if the unit is connected to your [Panasonic] i the unit’s name i [Multi-Function computer on Device Monitor (page 61). Station] L Computer features (printing, scanning, etc.) may not L Multi-Function Station will appear.

  • Page 25: Printer

    3. Printer 3 Printer Printer L If a printing error occurs, the Device Monitor will be 3.1 Printing from Windows started automatically and display the error information. applications Setting the printer properties You can print a file created in a Windows application. For You can change the printer setting in step 3.
  • Page 26 3. Printer – Labels that do not completely cover the backing 3.1.1 Using the manual input tray sheet as follows. You can print on plain paper and labels. The manual input tray is used only for printing with the computer and can hold one page at a time. When printing multiple pages, add a next page after the first page has been fed into the unit.

  • Page 27: Scanner

    4. Scanner 4 Scanner Scanner scan size). Press {>}, press {V} or {^} repeatedly to select the desired setting. i {SET} i {START} 4.1 Scanning from the unit (Push L The scanned image will be displayed in the Scan) [Multi-Function Viewer] window after scanning.
  • Page 28 4. Scanner L The e-mail software will automatically start and For LAN connection (KX-MB781 only): the scanned image will be attached to a new e- Press {V} or {^} repeatedly to select the computer that you want to send the scanned image. i {SET} mail message.

  • Page 29: Scanning From A Computer (Pull Scan)

    4. Scanner L To save the scanned image, select [Save As ...] 4.2 Scanning from a computer from the [File] menu. L To cancel scanning while the document is being (Pull Scan) scanned, click [Cancel]. Note: Note: L You can display images in applications that support L When scanning a document, we recommend using TIFF, JPEG, PCX, DCX and BMP formats.

  • Page 30: Copier

    5. Copier 5 Copier Copy After you finish copying, press {STOP} to reset the 5.1 Making a copy settings you set in step 3 and 4. Note: Illegal copies L To stop copying, see page 61. L It is unlawful to make copies of certain L You can change the default operation mode (feature documents.

  • Page 31: More Copying Features

    5. Copier 5.1.2 Using the auto document feeder 5.2 More copying features L Make sure that the {COPY} light is ON. 5.2.1 To enlarge/reduce a document Set the original (page 17). Press {ZOOM} repeatedly to select the enlargement / reduction rate that fits the size of your document and recording paper.
  • Page 32 5. Copier Example: 150% enlarged copy 5.2.2 To copy 2-sided documents onto 1 Using the scanner glass (1): page (Quick ID copy feature) (Scanner Original document Enlarged copy glass only) You can make copies of both sides of 2-sided documents and print them on the same side of paper.
  • Page 33 5. Copier Original document Page layout 5.2.4 To copy several pages onto 1 page (N in 1 feature) “8 in 1” “LANDSCAPE” You can save paper by copying 2, 4 or 8 pages onto 1 page. The documents will be reduced to fit the recording paper.
  • Page 34 5. Copier Original document Page layout During N in 1 feature 1. Set the original and enter necessary settings for N in “8 in 1” “PORTRAIT” 1 copy (steps 2 to 4 on “5.2.4 To copy several pages onto 1 page (N in 1 feature)”, page 33). 2.

  • Page 35: Fax (Kx-Mb781 Only)

    6. Fax (KX-MB781 only) 6 Fax (KX-MB781 only) Sending Faxes To select the resolution 6.1 Sending a fax manually Press {RESOLUTION} repeatedly. – “STANDARD”: For normal-sized characters. – “FINE”: For small-sized characters. 6.1.1 Using the scanner glass – “SUPER FINE”: For very small-sized characters. By using the scanner glass, you can send a page from –...

  • Page 36: Storing Items For The One-Touch Dial Feature And Navigator Directory

    6. Fax (KX-MB781 only) activated (page 52). For an explanation of error messages, see page 63. 6.2 Storing items for the one- touch dial feature and navigator 6.1.2 Using the auto document feeder directory The unit provides the one-touch dial feature (6 items) and navigator directory (100 items).

  • Page 37: Sending A Fax Using One-Touch Dial Feature And Navigator Directory

    6. Fax (KX-MB781 only) {MENU} 6.3 Sending a fax using one- Note: L A hyphen or a space entered in a telephone number touch dial feature and navigator counts as 2 digits. directory 6.2.3 Editing a stored item Before using this feature, store the desired names and telephone numbers into one-touch dial feature and {DIRECTORY} navigator directory (page 36).

  • Page 38: Broadcast Transmission

    6. Fax (KX-MB781 only) Enter the fax number using one-touch dial or navigator directory. 6.4 Broadcast transmission {START} By storing one-touch dial and navigator directory items (page 36) into the broadcast memory, you can send the same document to multiple parties (up to 20). Your programmed items will remain in the broadcast memory, allowing frequent re-use.

  • Page 39: Sending The Same Document To Pre- Programmed Parties

    6. Fax (KX-MB781 only) Press {V} or {^} repeatedly to display the desired 2. If necessary, change to the desired resolution (page broadcast memory (“<BROADCAST>” or “<MANUAL 35) and the desired contrast (page 35). BROAD>”). i {MENU} i {*} 3. Press {BROADCAST} or {MANUAL BROAD}. Press {V} or {^} repeatedly to display the desired item you want to add.

  • Page 40: Sending A Computer Document As A Fax Message From Your Computer

    6. Fax (KX-MB781 only) Receiving Faxes 6.5 Sending a computer 6.6 Receiving a fax automatically document as a fax message from – Auto answer ON your computer 6.6.1 Activating FAX ONLY mode You can access the fax function from a Windows Press {FAX AUTO ANSWER} repeatedly to display application using Multi-Function Station.

  • Page 41: Receiving A Fax Manually - Auto Answer Off

    6. Fax (KX-MB781 only) How to receive faxes with the optional handset unit 6.7 Receiving a fax manually – 1. Lift the handset to answer the call. Auto answer OFF 2. When: Use this mode with an extension telephone or the –...

  • Page 42: Using The Unit With An Answering Machine

    6. Fax (KX-MB781 only) Note: 6.8 Using the unit with an L If the call is a phone call, the answering machine will record voice messages. answering machine If a fax calling tone is detected, the fax machine will receive a fax automatically. 6.8.1 Setting up the unit and an answering Receiving a voice message and fax document in one call...

  • Page 43: Junk Fax Prohibitor (Preventing Fax Reception From Undesired Callers)

    6. Fax (KX-MB781 only) 2. Press {>} repeatedly to display “JUNK LIST DISP.”. i {SET} 6.9 Junk fax prohibitor 3. Press {V} or {^} repeatedly to display the desired (preventing fax reception from item. i {<} undesired callers) L To cancel erasing, press {STOP}, then press {MENU}.

  • Page 44: Receiving A Fax Into Your Computer

    6. Fax (KX-MB781 only) 6.10 Receiving a fax into your computer You can receive a fax document on your computer. The received fax document is saved as an image file (TIFF- G4 format). To receive a fax document using your computer, make sure the following features are set beforehand.

  • Page 45: Caller Id (Kx-Mb781 Only)

    7. Caller ID (KX-MB781 only) 7 Caller ID (KX-MB781 only) Caller ID 7.1 Caller ID service 7.2 Viewing and calling back This unit is compatible with the Caller ID service using caller information offered by your local telephone company. To use this {CALLER ID} unit’s Caller ID features, you must subscribe to a Caller ID service.

  • Page 46: Erasing Caller Information

    7. Caller ID (KX-MB781 only) 7.3 Erasing caller information 7.4 Storing caller information 7.3.1 Erasing all caller information 7.4.1 Into the one-touch dial feature and navigator directory Press {MENU} repeatedly to display “CALLER SETUP”. i {SET} {CALLER ID} L “CALL LIST ERASE” will be displayed. Press {V} or {^} repeatedly to display the desired {SET} item.

  • Page 47: Distinctive Ring (Kx-Mb781 Only)

    8. Distinctive Ring (KX-MB781 only) 8 Distinctive Ring (KX-MB781 only) Distinctive Ring To use one phone number for the fax, program the ring 8.1 Distinctive Ring service pattern assigned for the fax (feature #431 on page 47). In the example, the ring pattern assigned for fax is a triple When a call is made to one of your phone numbers, the ring, so you should program “C”...

  • Page 48: Programmable Features

    9. Programmable Features 9 Programmable Features Features Summary 9.1 Programming {MENU} {SET} {MENU} Press {#} and the 3-digit code. Press the desired selection to display the desired setting. L This step may be slightly different depending on the feature. {SET} Press {MENU} to exit.

  • Page 49: Basic Features

    9. Programmable Features 9.2 Basic features Feature/Code Selection Setting the quick setup You can print out the quick fax setup guide and select the desired receiving mode depending on your situation. {#}{1}{0}{0} {1} “FAX ONLY” (default): Use only as a fax (page 40). (KX-MB781 only) {2} “DIST.
  • Page 50 9. Programmable Features Feature/Code Selection 1. {MENU} i {#}{1}{5}{5} i {SET} Changing the password for feature programming via 2. Enter the current password. i {SET} remote operation L The default password is “1234”. {#}{1}{5}{5} 3. Enter a new 4-digit password using 0–9. i {SET} 4.
  • Page 51 9. Programmable Features Feature/Code Selection Setting the default operation To set the timer before returning to the default operation mode (feature #463). mode timer {0} “OFF”: Deactivates this feature. {1} “30s”: 30 seconds {#}{4}{6}{4} (KX-MB781 only) {2} “1min” (default): 1 minute {3} “2min”: 2 minutes {4} “5min”: 5 minutes Setting toner save feature...

  • Page 52: Fax Features (Kx-Mb781 Only)

    9. Programmable Features 9.3 Fax features (KX-MB781 only) Feature/Code Selection Printing a confirmation report {0} “OFF”: Confirmation reports will not be printed. {1} “ON”: A confirmation report will be printed after every fax transmission. {#}{4}{0}{1} {2} “ERROR” (default): A confirmation report will be printed only when fax transmission fails.
  • Page 53 9. Programmable Features Feature/Code Selection Setting the Error Correction This feature is available when the sending / receiving fax machines are ECM Mode (ECM) compatible. {0} “OFF”: Deactivates this feature. {#}{4}{1}{3} {1} “ON” (default): If there is an error during fax transmission / reception, the unit will support the communication.
  • Page 54 9. Programmable Features Feature/Code Selection Receiving a fax into the If you wish to receive a fax into the computer, activate this feature and run [PC computer FAX] from Multi-Function Station. {0} “OFF” (default): Deactivates this feature. {#}{4}{4}{2} {1} “ALWAYS”: If the unit recognizes the connection to the computer, it will transfer a received document to the computer.

  • Page 55: Copy Features

    9. Programmable Features 9.4 Copy features Feature/Code Selection Changing the default copy To change the default resolution setting for copying. resolution {1} “TEXT/PHOTO”: For documents containing both text and photographs. {2} “TEXT” (default): For documents containing only text. {#}{4}{6}{1} {3} “PHOTO”: For documents containing photographs, shaded drawings, etc. Holding the previous page {0} “DISABLED”...

  • Page 56: Scan Features

    9. Programmable Features 9.6 Scan features Feature/Code Selection Setting the scan mode for {1} “VIEWER” (default): The scanned image will be displayed in the [Multi- Push Scan Function Viewer] window. {2} “FILE”: The scanned image will be saved as a file. {#}{4}{9}{3} {3} “E-MAIL”: The scanned image will be saved for e-mail attachment.

  • Page 57: Lan Features (Kx-Mb781 Only)

    9. Programmable Features 9.7 LAN features (KX-MB781 only) Feature/Code Selection LAN setting with a DHCP {0} “DISABLED”: Deactivates this feature. server {1} “ENABLED” (default): The following will be allocated automatically using a DHCP (Dynamic Host Configuration Protocol) server. {#}{5}{0}{0} – IP address –...
  • Page 58 9. Programmable Features Feature/Code Selection Setting HTTPD for the LAN {0} “DISABLED”: Denies access to the web browser. connection {1} “ENABLED” (default): Allows access to the web browser. {#}{5}{3}{4}...

  • Page 59: Network Features (Kx-Mb781, Lan Connection Only)

    9. Programmable Features 9.8 Network features (KX-MB781, LAN connection only) These features can be programmed only by using the web browser. Feature Selection Setting the location [LAN FEATURE] Enter the location information of the unit. where you use this unit SMTP setting for scan to [E-MAIL FEATURE] Enter the SMTP server information to send scanned...

  • Page 60: Useful Information

    10. Useful Information 10 Useful Information Useful Information 10.1 Character entry 10.2 Status of the unit The dial keypad is used to enter characters and numbers. 10.2.1 Using Remote Control – Press {<} or {>} to move the cursor. You can easily operate the following functions from your –...

  • Page 61: Canceling The Operations

    10. Useful Information L When “USER STOPPED” is not displayed, go to 10.2.2 Using Device Monitor step 2. You can confirm the setting information and current To cancel printing: status of the unit from your computer. Press {STOP} repeatedly to display “STOP Start Multi-Function Station.

  • Page 62: Optional Handset Unit (Kx-Mb781 Only)

    10. Useful Information Caution: 10.4 Optional handset unit (KX- L When moving the unit, be sure to hold by the grip. Do not hold by the handset unit. MB781 only) Correct Incorrect You can add the optional handset unit. See page 6 for accessory information.

  • Page 63: Help

    PRESSED THE STOP KEY ----- L {STOP} was pressed and fax communication was canceled. THE COVER WAS OPENED ----- L The top cover was opened. Close it and try again. ----- L Fax transmission or reception was successful. For assistance, please visit http://www.panasonic.com/help...

  • Page 64: Error Messages - Display

    L When making a copy, the document being stored exceeded the memory capacity of the unit. Press {STOP} to clear the message. Divide the document into sections. “MODEM ERROR” L There is something wrong with the unit’s modem. Contact our service personnel. For assistance, please visit http://www.panasonic.com/help...
  • Page 65 L The inside of the unit is cold. Let the unit warm up. Wait for a while. “WRONG PAPER” L The fax message was printed on paper which is shorter than letter size paper. Use the appropriate size paper (page 85). For assistance, please visit http://www.panasonic.com/help...

  • Page 66: When A Function Does Not Work

    L The printer driver has not been installed. Install it on your computer (page [Target Device] or [Device 22). Select] dialog box when operating the following functions. – Scanning – Remote Control – PC FAX (KX-MB781 only) – Device Monitor For assistance, please visit http://www.panasonic.com/help...

  • Page 67: Printing Problems

    L Remove the document in the auto document feeder and re-insert it. the unit when using the unit as a scanner. Even after clicking [Cancel], L Please wait. It may take a while for the cancel request to be accepted. scanning continues. For assistance, please visit http://www.panasonic.com/help...
  • Page 68 L The IP address of the unit may have changed. To detect the IP address, proceed as follows. [Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [IP Address Checker]. L The IP address for the unit will be detected.
  • Page 69 I cannot receive beforehand. documents by pressing L Press {*}{#}{9} firmly. L You may have changed the remote fax activation code from {*}{#}{9} {*}{#}{9}. (default setting). Verify the remote fax activation code (feature #434 on page 53). For assistance, please visit http://www.panasonic.com/help...
  • Page 70 L Make sure the following features are set beforehand. document on the computer. – PC fax reception (feature #442 on page 54) – Computer setting for the PC fax reception (feature #443 on page 21) For assistance, please visit http://www.panasonic.com/help...
  • Page 71 L The IP address of the unit may have changed. To detect the IP address, proceed as follows. [Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [IP Address Checker]. L The IP address for the unit will be detected.
  • Page 72 The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above functions properly. Insert the CD-ROM that is included with the unit into your CD-ROM drive. L [Panasonic Setup] dialog box will appear. For assistance, please visit http://www.panasonic.com/help...
  • Page 73 L The [Windows Firewall] dialog box will appear. 3. Click the [Exceptions] tab. 4. Confirm that [Panasonic Trap Monitor Service] and [PCCMFLPD] are displayed and checked on the [Programs and Services] list. To confirm the security settings (For Windows Vista users) 1.

  • Page 74: Paper Jams

    12. Paper Jams 12 Paper Jams Jams Case 1: 12.1 Recording paper jam When the recording paper has jammed near the manual input tray: 1. Pull open the paper input tray (1). 12.1.1 When the recording paper has jammed inside of the unit The display will show the following.
  • Page 75 12. Paper Jams 3. Close the paper input tray. Case 2: When the recording paper has jammed near the drum and toner unit: 1. Pull open the paper input tray (1). L Open and close the top cover (4) to clear the error message.
  • Page 76 12. Paper Jams 3. Remove the jammed paper (6) carefully by pulling it 4. Close the paper input tray. upwards. 5. Close the top cover until locked. Remove the jammed paper (7) carefully by pulling it toward you.
  • Page 77 12. Paper Jams Case 3: 3. Remove the jammed paper (6) carefully by pulling it When the recording paper has jammed near the upwards. fuser unit: 1. Lift the top cover release lever (1) and open the top cover (2). 4.
  • Page 78 12. Paper Jams 12.1.2 When the recording paper is not fed 12.1.3 When the recording paper in the into the unit properly manual input tray is not fed into the unit The display will show the following. properly The display will show the following. CHECK PAPER #1 PRESS START CHECK PICK UP...

  • Page 79: Document Jams (Auto Document Feeder)

    12. Paper Jams When the document has jammed near the 12.2 Document jams (Auto document exit: document feeder) Caution: L Do not pull out the jammed document forcibly before lifting the ADF cover. Close the ADF cover. Open the ADF cover (1) while holding the document cover (2).

  • Page 80: Cleaning

    13. Cleaning 13 Cleaning Cleaning Close the document cover (5). 13.1 Cleaning the white plates and glass Clean the white plates and glass when a black line, a white line or a dirty pattern appears on: – your recording paper, –...
  • Page 81 13. Cleaning Clean the lower glass (6) with a soft and dry cloth. 13.1.2 Lower glass Disconnect the power cord. Lift the top cover release lever (1) and open the top cover (2). Reinstall the drum and toner unit (7) by holding the tabs.
  • Page 82 13. Cleaning L Make sure that the triangles (8) match, to install Caution: the drum and toner unit correctly. L To prevent injuries, be careful not to put your hands under the top cover. Re-connect the power cord. Close the top cover until locked.

  • Page 83: Cleaning The Document Feeder Rollers

    13. Cleaning Close the ADF cover. 13.2 Cleaning the document feeder rollers Clean the rollers when the document or recording paper frequently misfeeds. Disconnect the power cord. Open the ADF cover (1) while holding the document cover (2). Re-connect the power cord. Clean the document feeder rollers (3) with a cloth moistened with isopropyl rubbing alcohol, and let all parts dry thoroughly.

  • Page 84: General Information

    14. General Information 14 General Information Printed Repor ts Specifications 14.1 Reference lists and reports 14.2 Specifications You can print out the following lists and reports for your ■ Applicable lines reference. Public Switched Telephone Network – “SETUP LIST” ■ Document size: –...
  • Page 85 14. General Information ■ Power supply: Label size: Letter: 216 mm × 279 mm (8 " × 11") 120 V AC, 60 Hz A4: 210 mm × 297 mm (8 " × 11 ") ■ Memory capacity (for operation and storing memory): Recording paper weight: 32 MB 60 g/m...
  • Page 86 2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time. 2.7 Your logo.2.8 Your fax number 3. Copy / Copying 3.1 Using the unit as a copy machine. Thank you for purchasing a Panasonic fax machine. Things you should keep a record of Attach your sales receipt here.

  • Page 87: Information Of Copyrights And Licenses (Kx-Mb781 Only)

    14. General Information Copyrights 14.3 Information of copyrights and licenses (KX-MB781 only) L This product uses a part of NetBSD kernel. The use of a part of NetBSD kernel is based on the typical BSD style license below. Copyright (c) The Regents of the University of California.
  • Page 88 14. General Information Copyright (c) 1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1982, 1986, 1990, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1982, 1986, 1990, 1993, 1994 The Regents of the University of California. All rights reserved.
  • Page 89 14. General Information Copyright (c) 1996,1999 by Internet Software Consortium. Copyright (c) 1996-1999 by Internet Software Consortium. Copyright (c) 1997 Jonathan Stone and Jason R. Thorpe. All rights reserved. Copyright (c) 1997 Christos Zoulas. All rights reserved. Copyright (c) 1997 Manuel Bouyer. All rights reserved. Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
  • Page 90 14. General Information L This product contains Net-SNMP software and is using it based on the following license conditions. ---- Part 1: CMU/UCD copyright notice: (BSD like) ----- Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any purpose and...
  • Page 91 14. General Information ---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----- Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 92 14. General Information DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 93 14. General Information However, parts of the thttpd software are provided with the following copyright notices. Copyright 1995 by Jef Poskanzer <jef@acme.com>. Copyright 1998 by Jef Poskanzer <jef@acme.com>. Copyright 1999 by Jef Poskanzer <jef@acme.com>. Copyright 1995,2000 by Jef Poskanzer <jef@acme.com>. Copyright 1999,2000 by Jef Poskanzer <jef@acme.com>.

  • Page 94: Index

    15. Index 15. Index Auto document feeder: 17, 31, 36 15.1 Index Auto IP (Feature #533): 57 Auto reduction (Feature #432): 53 # #100 Quick setup: 49 B Basic features: 49 #101 Date and time: 19 Broadcast programming list: 84 #102 Your logo: 20 Broadcast transmission: 38 #103 Your fax number: 20...
  • Page 95 15. Index Help: 18 Automatically: 40 Basic settings: 18 Manually: 41 Caller ID: 18 Recording paper: 13 Copier: 18 Recording paper size: 85 Directory: 18 Redialing: 35, 37 Errors: 18 Reports Fax sending/receiving: 18 Address: 84 Feature list: 18 Broadcast programming: 84 Q and A: 18 Broadcast sending: 39 Reports: 18...
  • Page 96 PFQX2722ZA CM0607NK0 (CD)

This manual is also suitable for:

Kx-mb781

Table of Contents