Panasonic KX-MB2085CX Operating Instructions Manual page 73

Feature
Setting the fax to email
destinations
Setting the information
for scan to FTP
Setting the information
for scan to SMB folder
Selection
Select email destinations where you want to automatically send received fax
documents to (up to 6 destinations).
Important:
R Program the email server settings (page 74), and the email destinations
(page 75) beforehand.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type "root" as the user name, then enter the password (feature #155 on
page 57). A [OK]
4. Select the [FAX FEATURE] from the menu.
5. Select [ON] from the [FAX AUTO EMAIL] drop-down list.
6. Click [Edit] next to [DESTINATION].
7. Click [Address Book] next to the desired destination.
8. Click the name that you want to send the received fax documents to.
9. [Submit]
10. Close the web browser.
Note:
R To check the status of the last 15 transfers, click [List] next to [RESULT] in step
6.
When you send scanned files to an FTP server, you can register the FTP destinations
(up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type "root" as the user name, then enter the password (feature #155 on
page 57). A [OK]
4. Select [SCAN FEATURE] from the menu.
5. Click [Edit] next to [FTP SERVER].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder path, etc. A [Submit]
8. Close the web browser.
Note:
R If you do not enter a folder path in step 7, the scanned image will be saved in the
root folder.
When you send scanned files to an SMB folder, you can register the SMB folder
destinations (up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type "root" as the user name, then enter the password (feature #155 on
page 57). A [OK]
4. Select [SCAN FEATURE] from the menu.
5. Click [Edit] next to [SMB FOLDER].
6. Click [Edit] next to the desired SMB folder.
7. Enter the folder name and account information.
8. Click [Browse], and select a desired computer and/or folder directory from the
list. A [OK]
R You can also enter the folder directory manually.
9. [Submit]
10. Close the web browser.
9. Programmable Features
73