Panasonic KX-MB2085CX Operating Instructions Manual page 64

9. Programmable Features
Feature/Code
Setting the memory reception
alert
MBNM4NM3NM7N
Setting friendly reception
MBNM4NM3NM8N
Receiving a fax into the
computer
MBNM4NM4NM2N
Setting the computer for PC
fax reception
MBNM4NM4NM3N
(KX-MB2090 only)
Setting the fax preview mode
MBNM4NM4NM8N
(KX-MB2090 only)
Setting the web fax preview
access code
MBNM4NM5NM0N
(KX-MB2090 only)
Setting notification of fax
reception
MBNM4NM5NM1N
64
Selection
To alert you with a beeping sound when a received fax document is stored into
memory.
M0N "OFF": Deactivates this feature.
M1N "ON" (default): You will hear a beeping sound.
Note:
R If documents are stored into memory due to some printing problem, the
beeps will continue until you solve the problem. If a message is displayed,
see page 84 to page 86 for directions on printing out the stored
documents. Make sure the unit is supplied with enough paper to print the
stored document.
R If documents are stored into memory due to activating the web fax preview
(feature #448 on page 51), the unit will not beep. However, the unit will start
to beep when the memory is nearly full (KX-MB2090 only).
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N "OFF": You have to press MSTARTN, and then M2N for fax reception.
M1N "ON" (default): You do not have to press MSTARTN, and then M2N for fax
reception.
If you wish to receive a fax into a computer, activate this feature and run [PC
FAX] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature #448
on page 51) (KX-MB2090 only).
M0N "OFF" (default): Deactivates this feature.
M1N "ALWAYS": If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will store received documents into memory, and then transfer the
data after recognition of the computer connection.
M2N "CONNECTED": If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will print the data.
To select the computer that will be used for receiving a fax. See page 50 for
details.
See page 51 for details.
1. MMENUN A MBNM4NM5NM0N A MSETN
2. Enter the password (feature #155 on page 57). A MSETN
3. Enter the web fax preview access code, up to 8 characters, using the English
alphabet and numbers (see page 76 for character entry).
R The following symbols can also be entered using M0N or M1N.
! @ # $ % ^ & ' ) ( . - _ { }
4. MSETN A MMENUN
M0N "OFF" (default): Deactivates this feature.
M1N "ON": The computer connected to your unit using USB/LAN will receive a
notification when a fax document is received.
Note:
R For LAN connection (KX-MB2090 only): Register computers to which fax
reception notifications will be sent through the web browser interface
(page 72).