Default; Command Mode; Next Command Mode - Nortel Contivity1510D Reference

factory
config-name
disable-logins
disable-after-restartLogins should not be permitted after the reboot. This is
text

Default

The default settings for this command are determined by any previous reload
command. For the first reload command, the following defaults apply:
restart
boot-drive ide0
config-file latest

Command mode

Privileged Exec

Next command mode

Privileged Exec
The switch should be rebooted with the reset configuration file.
This file sets the switch to basic defaults; the contents of the
LDAP database and other settings are still maintained.
Name of previously saved configuration to use on reboot.
No more logins should be permitted before the reboot occurs.
intended to support system maintenance tasks after a reboot.
If present, this explains the reason for a reload command. This
reason will be displayed on the Admin->Shutdown and
Status->System Web management pages.
If the value for the text parameter contains spaces, it may be
enclosed in double quotes so that it has a single parameter
value.
Reference for the Contivity VPN Switch Command Line Interface
Chapter 2 CLI Command Summary 107