Table of Contents
Advertisement
Chapter 3 Bulk Load Command 201
LOCAL_UID: [Tunnel authentication - local user ID - (PPTP &
L2TP tunnel types) - Required for PPTP/L2TP]
PEER_UID: [Tunnel authentication - peer user ID - (PPTP &
L2TP tunnel types) - Required for PPTP/L2TP]
PEER_PSW: [Tunnel authentication - peer password - (PPTP &
L2TP tunnel types
]
)
COMPRESSION: [PPTP & L2TP compression {Enable/Disable} -
(PPTP & L2TP tunnel types)]
ENC_STATE_MODE: [PPTP & L2TP Compression/Encryption
stateless mode {Enable/Disable} - (PPTP & L2TP tunnel
types)]
// L2TP specific authentication parameters
CONCENTRATOR: [L2TP Concentrator (L2TP tunnel type)]
L2TP_IPSEC_XPORT: [L2TP IPSEC Transport {None, 3DES, 56DES,
40DES, AH} - (L2TP tunnel type only)]
END
Reference for the Contivity VPN Switch Command Line Interface
Advertisement
Table of Contents
