Table of Contents
Advertisement
38 Chapter 1 Introduction
Table 3 Privileged Exec Mode commands
Command
show logging events
show logging history
show logging security
show logging syslog
Global Configuration Mode
This mode allows the administrator to make changes to the switch running
configuration. These changes are saved across reboots. This mode is also used to
access other configuration modes (Router, and so on, to be supported in
subsequent releases). The administrator enters this mode from Privileged Exec
mode using the configure command. To leave this mode and return to Privileged
Exec mode, the user enters Ctrl-Z.
Global Configuration Mode prompt
CES(config)#
Global Configuration Mode commands
The following table summarizes the Global Configuration Mode commands.
Table 4 Global Configuration Mode commands
Command
arp
audible alarm
console mode
control
default logging history
enable password
end
311645-A Rev 00
Description
Show event log contents
Show the logging history setting
Show security log contents
Show system log contents
Description
Delete ARP cache entries
Enable audible alarm
Set administration console mode
(Mini-CLI)
Maintain control tunnel connections
(Mini-CLI)
Set logging history level to default
value
Assign privileged level password
Exit from configure mode
Advertisement
Table of Contents
