Related Commands; Example - Nortel Contivity1510D Reference

78 Chapter 2 CLI Command Summary

Related commands

ldap-server source
show ldap-server

Example

CES(config)#ldap-server source internal
CES(config)#ldap-server internal
Router(config-ldap)#server stop
Router(config-ldap)#server backup bk0901
Router(config-ldap)#server start
Router(config-ldap)#exit
This example sets the switch to use the internal LDAP server, stops the server, and
backs up the current server database to an LDIF file named /ide0/system/slapd/
ldif/bk0901. The prompt returns after the backup is completed, then the
administrator restarts the LDAP server.
CES(config)#ldap-server external
Router(config-ldap)#domain-delimiter @ suffix
Router(config-ldap)#suffix remove
Router(config-ldap)#host 122.33.102.44 master bind-dn cn=Management
bind-password myPas4wd
Router(config-ldap)#base-dn ou=engineering, o=Nortel Networks, c=US
Router(config-ldap)#exit
CES(config)#ldap-server source external
This example specifies the settings for a master LDAP server at IP address
122.33.102.44 port number nnn, with a bind DN and base DN. The domain
delimiter is the character @ and the domain suffix is removed. The switch is set to
use the external LDAP server.
311645-A Rev 00