ldap
This is a mini-CLI command to allow emulation of CLI commands available in
versions of the switch software earlier than Release 3.0.
This command allows the administrator to:
•
Start or stop the switch internal LDAP server
•
Export the LDAP database to an LDIF file on the switch
•
Import the LDAP database from an LDIF file on the switch
•
Show the current LDAP server status
Syntax
ldap [
Parameters
help
export
import
show
start
] {
help
export|import|show|start|stop
If present, the ldap command is not Executed, but some Help
about the command is displayed on the terminal.
Export the contents of the LDAP database to the named LDIF
file. The LDAP server must be stopped before an ldap export
can be performed.
Import the contents of the LDAP database from the named
LDIF file. The current LDAP database contents are replaced.
The LDAP server must be stopped before an ldap import can be
performed.
Display the status of the LDAP server.
Start the LDAP server running. This command cannot be
performed while the LDAP server is performing an export or
import command. This command cannot be Executed unless
the LDAP server is actually stopped.
Reference for the Contivity VPN Switch Command Line Interface
Chapter 2 CLI Command Summary 75
}