Licensing Commands - Nortel Contivity1510D Reference

218 Chapter 3 Bulk Load Command
CACHE_SIZE: [DHCP cache size]
IMMEDIATE_ADDR_REL: [Immediate address release {Enable/
Disable}]
END
The DELETE_DHCP command is used to remote an existing DHCP server.
COMMAND: DELETE_DHCP
DHCP_SERVER: [Existing DHCP server to remove {Primary/
Secondary/Tertiary} - Required]
END

Licensing commands

Licensing of certain features will be supported in bulkload version 3.0. The
following two commands allow the user to enable and disable a paid feature on the
CES:
ENABLE_PAID_FEATURE
DISABLE_PAID_FEATURE
The ENABLE_PAID_FEATURE command allows a user to specify the licensing
key to enable a paid feature on the CES.
COMMAND: ENABLE_PAID_FEATURE
PAID_KEY: [
END
The DISABLE_PAID_FEATURE command allows a user to specify the licensing
key to disable a paid feature on the CES.
COMMAND: DISABLE_PAID_FEATURE
311645-A Rev 00
Licensing key for the feature to be enabled
]