Meridian Nortel 1 Option 11C Mini Installation Manual page 97

Figure 16
Aligning the faceplate with the chassis
Chapter 6 — Installing the Option 11C Mini
27 Replace the faceplate.
a Fit the brackets at the bottom of the faceplate into the raised edge at
the bottom of the chassis. Move slightly to the left. See Figure 16.
Fit brackets onto
the front edge of
the chassis
b Move the faceplate down so that it fits over the raised edge at the
bottom of the chassis. See Figure 17.
Option 11C Mini Planning and Installation Guide
Page 97 of 332