Table of Contents
Advertisement
Chapter 7 — Important safety instructions
•
Some equipment has a three-wire grounding plug. This type of plug has
a third grounding pin. As a safety feature, the plug only fits into an
isolated ground outlet. If you cannot insert the plug completely into the
outlet, contact your electrician to replace the outlet.
Some equipment has a polarized line plug. This type of plug has one
blade wider than the other. As a safety feature, this plug fits into the
power outlet one way only. If you cannot insert the plug completely into
the outlet, try reversing the plug. If the plug continues to not fit, contact
your electrician to replace the plug.
•
Do not place objects on the power cord. Do not locate the product where
persons can walk on the plug.
•
Do not overload wall outlets and extension cords, as fire or electrical
shock can result.
•
Never push objects of any kind into the product through the cabinet slots.
The objects can come in contact with dangerous voltage points. Also,
parts can short out, causing the risk of fire or electrical shock. Never spill
liquid of any kind on to the product.
•
To reduce the risk of electrical shock, do not disassemble a telephone
product.
•
Remove the telephone plug from the wall outlet and refer servicing to
qualified personnel under the following conditions:
— If the power supply cord or plug is damaged or worn
— If liquid has spilled into the telephone
— If the telephone has been exposed to rain or water
— If the telephone has been dropped or the cabinet damaged
— If the product shows a distinct change in performance
— If the telephone does not function correctly under normal operating
conditions
•
Avoid using a telephone (except a type without a cord) during an
electrical storm. There can be a remote risk of electric shock from
lightning.
•
Do not use the telephone to report a gas leak in the area of the leak.
Option 11C Mini
Planning and Installation Guide
Page 103 of 332
Hide quick links:
Advertisement
Table of Contents
