Activating A Default Model Without A Character Display - Meridian Nortel 1 Option 11C Mini Installation Manual

Planning and installation guide
Hide thumbs Also See for Nortel Meridian 1 Option 11C Mini:
Table of Contents

Advertisement

Page 248 of 332

Activating a default model without a character display

553-3021-209
Standard 3.00
Chapter 17 — Connecting the telephones
Procedure 36
Activating a default model telephone without a character display
1
Plug the telephone set into the jack and wait 20 seconds before
you lift the handset. If you do not receive dial tone, replace the
handset and wait another 10 seconds before going off-hook
again. Repeat this procedure until you receive dial tone.
Note: The system requires the 20 second time interval to determine if
the set is new or if it is being relocated using the Modular Telephone
Relocation feature.
2
Press the pound key (#) to select the default model.
3
Press the pound key (#) again to select the default extension
number.
You hear a short, high-pitched beep which lasts four seconds followed
by silence (relocation tone).
Note: If the extension number is already in use by another telephone,
you hear three beeps followed by continuous dial tone (special dial tone).
To accept the default extension number press the pound key (#).
To select a new extension number, manually enter an extension
number and press the pound key.
If the extension number is not available for use, you hear a fast,
high-pitched broken tone (overflow tone). This happens when you
select an extension number manually or when extension numbers are
entered for additional keys. A default extension number is not offered
if it is not available. You must repeat Step 3 on page 248, and you must
manually enter a new extension number.
Note: If other keys require secondary extension numbers, you are
prompted until you enter all of the required extension numbers for the
model. These extension numbers cannot be defaulted. You are
prompted for each additional extension number with three beeps
followed by continuous dial tone (special dial tone). When you are
programming an extension number, the lamp associated with that
number on the telephone is lit.
—————————— End of Procedure ——————————
April 2000

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents