Table of Contents
Advertisement
6
Select "4 INSTALLATION OPTIONS" by entering the number "4".
The character display reads:
1 DEFAULT SETS
2 NUMBERING PLAN
7
Select "2 NUMBERING PLAN" by entering the number "2".
The character display reads:
FIRST NUMBER (XXXX)?
8
To create a new first number, enter the digits you want and press
the pound key.
The first number you enter in the numbering plan is assigned to slot 1,
unit zero of the Main Chassis. The default numbers assigned to the
remaining card and unit combinations are in sequence, assuming each
slot has up to 16 units.
—————————— End of Procedure ——————————
Determining new extension numbers
Perform the following procedure to change the default numbering plan, and
to determine the extension number to assign to a specific telephone:
Procedure 45
Determine the extension number
1
Identify the line card to which the telephone is connected. Take the
card slot number associated with the card and subtract 1.
2
Multiply this number by 16.
3
Add the first extension number in the new numbering plan.
4
Identify the unit number the telephone terminates on, and add it to the
result from step 3.
—————————— End of Procedure ——————————
Appendix B – Changing preprogrammed data
Option 11C Mini
Page 317 of 332
Planning and Installation Guide
Hide quick links:
Advertisement
Table of Contents
