Changing The Default Numbering Plan; Extensions Assigned Are Different From The Default Numbering Plan; Changing The First Number In The Numbering Plan - Meridian Nortel 1 Option 11C Mini Installation Manual

Page 316 of 332

Changing the default numbering plan

Extensions assigned are different from the default numbering
plan

Changing the first number in the numbering plan

553-3021-209 Standard 3.00
Appendix B – Changing preprogrammed data
Compare the first digits assigned to this system with the default numbering
plan.
• If the first digit is in the range that is not in use, change the first number
in the default numbering plan. To make this change, follow the
instructions in "Changing the first number in the numbering plan" on
page 316.
• If Meridian Mail Mini, trunk routes, or other data are using the first digit,
you must remove the conflicting data. Follow the instructions found in
"Removing numbering plan conflicts" on page 320.
To change the first number in the numbering plan perform the following
procedure:
Procedure 44
Changing the first number in the numbering plan
1 Lift the handset of the administration telephone.
2 Enter the administration Flexible Feature Code.
3 Enter the administration telephone password.
4 You hear special dial tone and the prompt "TASK?" appears on the top
line of the character display.
5 Press the asterisk (*) three times.
The second line of the character display reads "4 INSTALLATION
OPTIONS'".
April 2000