Equipment Layout Plan For Installing The Chassis In A Rack/Cabinet - Meridian Nortel 1 Option 11C Mini Installation Manual

Chapter 4 — Creating an equipment layout plan and a card slot assignment plan
Equipment layout plan for installing the chassis in a
rack/cabinet
You can install the Main Chassis and Chassis Expander in a 19 inch
rack/cabinet. There is also space in the rack/cabinet for additional pieces of
Data Communications Equipment. In a rack/cabinet configuration, the lowest
recommended installation position for the chassis is 1.75 inches (44 mm)
from the floor. See Figure 12.
Note: The 19 inch rack/cabinet does not come with the Option 11C Mini
system.
Option 11C Mini Planning and Installation Guide
Page 75 of 332