Meridian Nortel 1 Option 11C Mini Installation Manual page 130

Page 130 of 332
Figure 32
Typical layout for installing the chassis in a rack/cabinet
Maximum
of 21 in.
(533 mm)
Minimum
of 8.75 in.
(222 mm)
Space for
additional data
communications
equipment
553-3021-209 Standard 3.00
Chapter 9 — Installing the chassis
Recommended lowest
position for chassis
installation is 1.75 in. (44 mm)
from bottom of rack
Note 1: Leave wall space for the cross-connect terminal.
Note 2: The rack/cabinet does not have to be right against the wall. You
can position the rack/cabinet so that you have access to both the front and
back.
April 2000
Space for
additional data
communications
equipment
Main
P o w e r
F a n
Chassis
O RK S
NE TW
P o w e r
Chassis
F a n
Expander
O RK S
NE TW
Isolated
ground outlet
12 in. (305 mm)
553-9036