Meridian Nortel 1 Option 11C Mini Installation Manual page 94

Page 94 of 332 Chapter 6 — Installing the Option 11C Mini
Figure 15
Faceplate on the Option 11C Mini chassis
553-3021-209 Standard 3.00
Refer to one of the following procedures:
— Procedure 7: "Grounding the Option 11C Mini chassis" on page 141
— Procedure 8: "UK grounding procedure for the Option 11C Mini
chassis" on page 144
To ground multiple pieces of equipment in a rack/cabinet when one or
more pieces of equipment does not have a grounding lug, see "Grounding
multiple pieces of equipment in a rack/cabinet" on page 144.
10 If you require a UPS, install the UPS according to the manufacturer's
instructions.
11 If you have not already done so, remove the faceplate of the chassis.
a Loosen the quick-release screws on the faceplate of the chassis. See
Figure 15.
b Lift the faceplate up.
c Remove the faceplate.
April 2000
Loosen the
quick-release
screws