Printing Model Information; Analog Telephones; Digital Telephones; Removing Model Telephones - Meridian Nortel 1 Option 11C Mini Installation Manual

Page 328 of 332

Printing model information

Analog telephones

Digital telephones

Removing model telephones

553-3021-209 Standard 3.00
Appendix B – Changing preprogrammed data
To print information about model telephones, use LD 20.
LD 20
REQ PRT
TYPE 500 M
MODL YYY "YYY" = the telephone model number.
If you want to print all of the models for
this telephone type, leave this value blank.
Note: To print M3000 telephone models, you must enter "TYPE 3000
M". If you enter "TYPE 2XXX M", you print all the Meridian Digital
Telephone models except the M3000.
LD 20
REQ PRT
TYPE 2XXX M or 3000 M "XXX" = the telephone type
MODL YYY "YYY" = the telephone model number
(between 1 - 127). If you want to print all
of the models for this telephone type, leave
this value blank.
Use LD 10 to remove analog telephone models and LD 11 to remove digital
telephone models. Respond as follows to the prompts in either overlay:
LD 10 or LD 11
REQ OUT
TYPE XXXX M "XXXX" = telephone type for the model
you are removing (Example: 500, 2006,
2317, 2216, 3000.)
CUST 0
MODL YYY "YYY" = the model number associated
with the telephone type you are removing
(Valid range is 1-127).
April 2000