Answer Mode Configuration - Nortel 4075 User Manual

Units
Select
Call time
Message count
Reset
Yes

Answer mode configuration

You can configure your handset to handle incoming calls in any of the
following ways:
• Any key answer mode—you can answer with any key
• Autoanswer mode—the handset goes off-hook automatically
• Normal answer mode—answer using the
This section describes the following tasks:
• "Activating Any key answer mode" (page 190)
• "Activating Autoanswer mode" (page 190)
• "Activating Normal answer mode" (page 191)
2. Press the Up
option.
3. Press the Select
4. Press the Up
time option or the
Attention: The message count option is available
on the DECT 4070 and 4075 Handsets only.
The Call time
statistics for outgoing calls and messages.
5. Optionally, press the
statistics.
6. Press the Yes
7. Press the Clr
idle display.
or Down key to highlight the
soft key.
or Down key to highlight the
Message count
and Message count
Reset soft key to clear stored
soft key to confirm the changes.
key one or more times to return to the
OK or Call
Telephone settings
Units
Call
option.
options reflects
key
189